ICS525-01 frequency calculator results
 

Results for:
desired input frequency = 20 MHz
desired output frequency = 4.915254 MHz
desired output frequency accuracy = 100 ppm
Vdd= 5V
operating temperature = 0 to 70 deg C

Solutions for the ICS525-01:

	Out freq	error ppm	VCO divider	ref divider	VDW	RDW	OD	duty cycle spec
best accuracy	4.915254	0.0	29	59	21	57	4	45 - 55%
lowest jitter	4.915254	0.0	58	59	50	57	8	45 - 55%
lowest Idd	4.915254	0.0	29	59	21	57	4	45 - 55%

Set the input pins on the ICS525-01 according to this table:

			S2	S1	S0	R6	R5	R4	R3	R2	R1	R0	V8	V7	V6	V5	V4	V3	V2	V1	V0
	Out freq	error ppm	pin 5	4	3	2	1	28	27	26	25	24	18	17	16	15	14	13	12	11	10
best accuracy	4.915254	0.0	0	1	1	0	1	1	1	0	0	1	0	0	0	0	1	0	1	0	1
lowest jitter	4.915254	0.0	0	1	0	0	1	1	1	0	0	1	0	0	0	1	1	0	0	1	0
lowest Idd	4.915254	0.0	0	1	1	0	1	1	1	0	0	1	0	0	0	0	1	0	1	0	1

Press the "Back" button on your web browser to revise your inputs.
[Clear Input Form]

ICS525-02 frequency calculator results
 

Results for:
desired input frequency = 20 MHz
desired output frequency = 4.915254 MHz
desired output frequency accuracy = 100 ppm
Vdd= 5V
operating temperature = 0 to 70 deg C

Solutions for the ICS525-02:

	Out freq	error ppm	VCO divider	ref divider	VDW	RDW	OD	duty cycle spec
best accuracy	4.915254	0.0	29	59	21	57	4	45 - 55%
lowest jitter	4.915254	0.0	58	59	50	57	8	45 - 55%
lowest Idd	4.915254	0.0	29	59	21	57	4	45 - 55%

Set the input pins on the ICS525-02 according to this table:

			S2	S1	S0	R6	R5	R4	R3	R2	R1	R0	V8	V7	V6	V5	V4	V3	V2	V1	V0
	Out freq	error ppm	pin 5	4	3	2	1	28	27	26	25	24	18	17	16	15	14	13	12	11	10
best accuracy	4.915254	0.0	0	1	1	0	1	1	1	0	0	1	0	0	0	0	1	0	1	0	1
lowest jitter	4.915254	0.0	0	1	0	0	1	1	1	0	0	1	0	0	0	1	1	0	0	1	0
lowest Idd	4.915254	0.0	0	1	1	0	1	1	1	0	0	1	0	0	0	0	1	0	1	0	1

Press the "Back" button on your web browser to revise your inputs.
[Clear Input Form]

Choosing Between the ICS525-01 and ICS525-02
The differences between the ICS525-01 and -02 are primarily cost and performance. The -01 is the lower cost part ; the -02 the higher performance.
The ICS525-02 will operate to higher frequencies and typically has one third lower jitter than the -01 at 3.3V.
If this calculator produces acceptable solutions for both the -01 and -02, then the choice is based on price/performance. Where low cost is critical, use the -01 and where lower jitter is required, use the -02.